高温氧化铝陶瓷辊棒 High temperature alumina ceramic roller


高温氧 化铝陶瓷辊棒属刚玉莫来石制品,生产工艺先进,质量把控严格,具有高温强度大、热震稳定性好、耐腐蚀性强、直线度优异等特点,适用于玻化砖、内外墙砖、釉面砖、仿古砖 等辊道窑高温烧成生产线。

High temperature alumina ceramic roller of corundum mullite products, advanced production technology, strict quality control, has high strength, good thermal shock stability, strong corrosion resistance, excellent linearity characteristics, applicable to both inside and outside wall tiles, glazed tiles, antique bricks, such as roller kiln production line.


SF-F方梁 SF-F ceramic square beam


目前,对日用瓷、卫生瓷、电瓷、工艺瓷 等的焙烧多采用隧道窑、梭式窑 等高效率热工设备。其窑车 支架绝大多数选择SiC制品,尤其是横梁采用R-SiC材质,价格昂贵,大幅增加了使用成本。R-SiC方梁虽 然高温性能优越,但仍然 难以克服该材质固有的抗氧化性差的致命弱点,表现为 使用一个阶段后,由于氧 化造成的组织结构脆弱,使其高温强度 迅速衰减,缩短了使用寿命。

我公司 运用先进工业技术,采用进口原料,适时推出了SF-F方梁,该方梁 具有优良的高温性能和热震稳定性,承重大,直线度、平整度好,能在任 何高温气氛下使用,不存在氧化还原现象,寿命可达300次以上。

At present, the firing of table ware, sanitary ware, electronic ceramic and ceramic and craft ceramic mostly adopt the highly efficient thermal equipment such as tunnel kiln, shuttle kiln and so on. The supports of kiln car mostly are silicon-carbide products; especially crossbeams made of the very expensive R-SIC increase the expenses of consumption by a big margin. Although R-SIC square-beam has better high temperature properties, it is difficult for it to overcome its innate weakness of bad oxidation resistance, which can be proved form that its flexural strength at high temperature sharply reduces after used for a period of time, for the reason of that the structure becomes fragile due to oxidation. Undoubtedly, its using life is fairly short.

Our company introduces the SF-F square-beam properly, it is produced with advanced technology and imported raw materials. SF-F square-beam has good properties at high temperature, thermal shock resistance, straightness and flatness and can bear heavier load of products, it also can be used in any atmosphere at high temperature without oxidation and reduction. The life will up to 300 times.


辊道窑 急冷区星形辊棒、内外花棒Special shaped rollers for fast


为增强 辊道窑急冷区辊棒的抗弯能力开发生产的星形辊棒、内外花棒,在基础 不增加截面面积的情况下,间接增加了壁厚,从而有 效增强了对大风压产生的弯曲压力的抵抗能力,且热震性能优异,解决了该区域普 通辊棒 使用过程中易弯、易裂、易断的难题。

Special shaped rollers have been developed to increase the bending of the rollers used at the fast cooling zone of roller kiln .The wall thickness of the roller is indirectly increased with out increasing the area of the cross section. The bending strength of rollers against the heavy air pressure is effectively increased and the thermal shock resistance is excellent. It resolves the problem that the common rollers easily bend, crack and break when being used at fast cooling zone.


陶瓷辊用涂料 Coating for ceramic roller


陶瓷辊 用涂料是辊道窑用陶瓷辊的专用新产品。该产品 使用时涂覆在陶瓷辊表面形成厚度均匀的保护层,有效减 少釉料对陶瓷辊的粘结和侵蚀。本产品 施工方便且更换陶瓷辊时极易清理,可以延 长陶瓷辊的使用 寿命,降低建 筑陶瓷生产厂家的生产成本。

Coating for ceramic roller is one kind of new product specially used to protect ceramic roller for roller kiln. A protective layer with uniform thickness can be formed when the coating is coated on ceramic rollers surface which can effectively prevent the glazes from sticking to and eroding ceramic rollers. It is convenient to use this coating and it is easy to clean the glaze drops form rollers. Therefore, the using life of ceramic rollers can be prolonged, and the production cost of tiles plants can be reduced.

友情链接:    同裕彩票平台   bet007足球比分   福迎门彩票平台   福来宝娱乐彩票   大神彩票开户